File requirements


Size of the file below 2 Mb — please send files to e-mail address sales@vipline.ee
You can upload large files to our FTP server (address and password will be provided by a representative of Vipline)
You can bring the file on a Flash Card (USB) to our office — Tartu mnt. 80J, or send it by post on CD, DVD (please attach to the media the list of files that must be printed and mark the CD with the name of the Customer’s company)


Resolution of the file depends on the size of the printed product.

In case of small format printing (up to А3) resolution of the printing file must be min 300 dpi.

In case of printing of size of 500 x 500 mm of bigger, i.e. in case of wide format printing resolution can be 150 dpi.
The smaller printing of the image is, and the shorter the distance it is viewed from is, the bigger number of dpi is required.


We accept files for printing in the following formats – TIF, PDF, JPG, AI (Adobe Illustrator), CDR (CorelDraw) , PSD (Photoshop).
The file must not include additional layers, alpha channels and paths.
If your model has white background on its borders, there must be a black line (contour) identifying the place of cutting. This is required if any of the sides exceeds 900 mm.
No bleed for images is required, except for files with contour cutting, for example in case of stickers of a special shape or small format printing. In such cases it is necessary to add 3 mm margin for cutting to every edge.
The model must be presented in 1:1 scale or reduced in 1:10 proportion. In case of resolution of 300 dpi the scale of the image must be 1:10.
All colours used in the model must be presented in CMYK colour system (the parameters of colour separation are SWOP Coated, dot Gain 20%). For black surfaces 4 black colours are used: C:84, M:73, Y:73, K:91.


In the name of the file do not use letters and symbols with dots above them
MS Office is not suitable for creation of printing files
Do not use bleed where it is not necessary
Do not use overprint
Texts must be converted to curves, i.e. present vector graphics of the image
Please attach to the printing file the model or preview fail in JPG format
In case of work with a special colour tone add the printing colour code pantonе. Please understand, that the same 4-colour scheme is used, and that it is not always possible to get the same result as in case of spot colours
For a Roll-up stand with the width of 850 mm the file size must be 850*2030 mm, of which bottom 30 mm is the margin that is entered in the machine
If the provided file has grammar or spelling mistakes and other inaccuracies, you will be responsible for the quality of the product


The file given to us must include bleed for cutting – 3 mm margins for cutting from each edge.

Our experienced employee will be happy to answer any additional questions.

Contact us

Sinilille tee 6-7, Peetri, Harjumaa, Estonia
(+372) 689 8300
(+372) 568 87580
(+372) 568 87590
Monday-Friday 9:00-17:00

Pin It on Pinterest

Share This